tainter gate การใช้

• Both these outlets and the spillway are controlled by tainter gates.
• The Tainter gate is used in water control dams and locks worldwide.
• The Tainter gate was invented and first implemented in Menomonie, Wisconsin.
• The dam is long with 9 tainter gates, each wide by high.
• The earthen Santee Dam is eight miles long and has 62 Tainter gates.
• The ten Tainter gates are opened wider in an effort to stabilize reservoir rise.
• The dam contains a . long emergency spillway controlled by six steel tainter gates.
• Flood waters are released through a concrete ogee crest spillway with 16 tainter gates.
• Nine tainter gates and one sluice gate control the flow over water down the spillway.
• The spillway is a gated ogee weir, wide with eighteen tainter gates, each by.
• When a Tainter gate is closed, water bears on the convex ( upstream ) side.
• Tainter gates are usually controlled from above with a chain / gearbox / electric motor assembly.
• The dam's spillway is equipped with 60 tainter gates with a combined discharge of.
• The dam consists of a concrete structure long with five roller gates and 10 tainter gates.
• The composite dam is tall and the gravity section features a spillway with two tainter gates.
• The Upper Mississippi River basin alone has 321 Tainter gates, and the Columbia River basin has 195.
• The movable portion of the dam is long and consists of ten tainter gates and three roller gates.
• Control is provided by three 34 by tainter gates supported by wide concrete piers resting on concrete ogee sections.
• A Tainter gate is also used to divert the flow of water to San Fernando Power Plant on the Los Angeles Aqueduct.
• The ten Tainter gates are opened to accommodate additional lake inflow from the White River Basin including the James River and Beaver Lake discharge.